Whether you use glue, polycrylic, or shellac is up to you. Once you’ve gathered some sawdust, dump it out on your paper plate or the surface that you’ll be mixing your wood filler on. If there are a lot of knots, but your wood filler will be used on an area without knots, try to avoid sanding the knots since they are much darker than the rest of the wood. Pay attention to where on the board you are spending the most time sanding. Once it’s cleaned out, sand the wood that you’re going to apply the wood filler to. Unless you always use the same type of wood, I’d recommend first dumping out the bag of sawdust that’s attached to your sander. A binding agent like glue, shellac, or polycrylic.A plastic spoon, craft stick, or something else to mix your wood filler.A white paper plate, a cup, or another clean surface to mix your wood filler on.Regardless of which DIY wood filler you try to make, the process is the same. Keep reading to hear more about the results and details of each of the wood filler options. So let’s put these three DIY wood fillers to the test! Overall, we liked the results of the sawdust and polycrylic mixture in terms of stainability and consistency, but the shellac won in terms of overall coverage. There are two main benefits of DIY wood filler: it’s cheap to make because you’re using sawdust that you already have and since you’re using sawdust from the project, you might be able to get a better color match. We tried 7 popular store brands and now we’re testing out some DIY wood filler options. We’ve been on a mission to find the best wood filler out there. This post contains affiliate links for your convenience (which means if you make a purchase after clicking a link, I earn a teeny-tiny commission, but it won’t cost you a penny more)! Click here to read our full disclosure.
0 Comments
Leave a Reply. |